For hospitals of any size, the INNOVA® M4, M5 and M5-ISO are the ideal solution. With these machines we offer a complete solution which can be individually adjusted to the requirements of the customer.
The INNOVA M4 with bottomhinged doors is suitable for smaller capacities. The INNOVA M5 and M5-ISO with sliding doors are optimal for bigger volumes.
All three machines are available as single door models and also as pass-through models with two doors.
The INNOVA M4 with bottomhinged doors is suitable for smaller capacities. The INNOVA M5 and M5-ISO with sliding doors are optimal for bigger volumes.
All three machines are available as single door models and also as pass-through models with two doors.
BHT HYGIENETECHNIK OFFERS SOLUTIONS:
With the INNOVA® M4, M5 and M5-ISO we offer three washer/disinfectors,which provide high efficiency in the Central Sterilization.
The four parameters Temperature, Time, Mechanical Action and Chemicals have to be well-suited to each other. Only in this case, can optimum results be achieved with a washer/disinfector.
KEY DESIGN FEATURES
STANDARD EQUIPMENT
The four parameters Temperature, Time, Mechanical Action and Chemicals have to be well-suited to each other. Only in this case, can optimum results be achieved with a washer/disinfector.
Temperature
Precise temperature control by high-quality temperature sensors.
Time
Precise control of the holding times by the microprocessor.
Mechanical Action
High pump capacity and the circulation design ensures that the water is brought directly to the instrument load.
Chemicals
Secure, volumetric and validatable dosage of the wash chemicals.
Precise temperature control by high-quality temperature sensors.
Time
Precise control of the holding times by the microprocessor.
Mechanical Action
High pump capacity and the circulation design ensures that the water is brought directly to the instrument load.
Chemicals
Secure, volumetric and validatable dosage of the wash chemicals.
KEY PANEL
The program choice is made via a clear key panel. On the full-text display, information on the actual program, the process steps and status messages are indicated. Process parameters can be individually adjusted by a technician according to the customer's requirements. Troubleshooting is also possible via the key panel. This makes maintenance and Service easier and reduces the service time.
Printer
An integrated printer records the cycle parameters.
The program choice is made via a clear key panel. On the full-text display, information on the actual program, the process steps and status messages are indicated. Process parameters can be individually adjusted by a technician according to the customer's requirements. Troubleshooting is also possible via the key panel. This makes maintenance and Service easier and reduces the service time.
Printer
An integrated printer records the cycle parameters.
KEY DESIGN FEATURES
- The drying is carried out by blowing air through the wash arms. This dries the load outside and inside.
- The machines are completely made of 304 stainless steel.
- The optional connection to an external documentation PC.
The cycle data can be collected and stored on the PC. - The heating of the tank, dryer and optional DI-water-boiler can be carried out either electrically or with steam-heat exchangers.
- Equipped with two dosage pumps with volumetric controls and two level sensors to indicate the need to replace the chemical canisters.
- 2 independent circulation pumps supply the rotating arms and the water channels for the direct jet spraying.
- Maintenance-friendly access of all components.
STANDARD EQUIPMENT
- Freely programmable microprocessor control with optional interface for the connection to a documentation system
- Key panel with alphanumeric display
- 2 fully automatic dosage pumps for liquid additives
- 2 dosage controls and 2 level controls
- Level control device regulates the filling and draining of the machine
- 2 independent circulation pumps for the supply of the rotating arms and the racks
- High capacity air drying via the wash system for the drying from inside and outside
- Supervision of the pump pressure
- Complete drainage of the pumps avoids cross contamination
- CE-certification
- Validatable according to prEN ISO 15883 and HTM 2030
| SPECIFICATIONS | INNOVA®M4 | INNOVA® M5 | INNOVA® M5-ISO |
| Dimensions (WxDxH) | 800 x 750 x 1975 mm | 900 x 840 x 2000 mm | 900 x 1040 x 2000 mm |
| Wash chamber (WxDxH) | 500 x 650 x 625 mm | 650 x 680 x 625 mm | 650 x 880 x 625 mm |
| Material | Housing and wash chamber completely made of stainless steel Cr-Ni 1.4301 | ||
| Electrical connections | 3 x 400 V, 50 Hz | 3 x 400 V, 50 Hz | 3 x 400 V, 50Hz |
| Fuse protection | 32 A | 32 A | 40 A |
| Connected load | 16 kW | 16 kW | 22 kW |
| Water supply | CW, WW (max. 22° dH), DI-water (max. 10 £gS) | ||
| Supply/ flow pressure | 8 – 20 l/min., 2 – 5 bar | ||
| Connection | 3/4", DN 20 | ||
| Drain | DN 70, 30 l/min. | ||
| Steam (option) | 3/4", 1,5 – 3 bar | ||
| Condensate (option) | 3/4", without pressure | ||
| Pump capacity | effective 600 + 290 l/min. | ||
| Drying capacity | 450 m 3/h | ||
