For more than 25 years BHT has been one of the acknowledged leaders in the development and production of innovative washer-disinfectors in the areas of healthcare, laboratory and pharmaceutical industry. BHT is a medium sized, internationally active enterprise with two production sites in the heart of Bavaria, Germany.
Extensive patents and other protective rights document the high potential of BHT. BHT is certified according to EN ISO 13485:2003.
To achieve optimum results in a washer-disinfector, the four parameters: Temperature, Time, Mechanics and Cleaning Agents must interact perfectly.
Extensive patents and other protective rights document the high potential of BHT. BHT is certified according to EN ISO 13485:2003.
To achieve optimum results in a washer-disinfector, the four parameters: Temperature, Time, Mechanics and Cleaning Agents must interact perfectly.
A microprocessor control provides safe and validatable cleaning results according to EN ISO 15883. Innovative control techniques with top-quality sensors and efficient micro-processors and controls guarantees cortrect water pressure, temperature values, times and dosing. The controller software provides a fully validatable process. In case of error function the washer-disinfector will stop automatically. Error messages appear in the display and will be recorded.
Precise dosing: The dosing, related by volume and viscosity, and controlled by the program, allows optimal operation in regard to efficiency and saving of cleaning agents and disinfectants.
High quality material: such as 304 stainless steel 1 - 1.25 mm thick and proven synthetic material will withstand long-term use.
Easy service and simple maintenance: the side panels can be removed to create access for service.
Precise dosing: The dosing, related by volume and viscosity, and controlled by the program, allows optimal operation in regard to efficiency and saving of cleaning agents and disinfectants.
High quality material: such as 304 stainless steel 1 - 1.25 mm thick and proven synthetic material will withstand long-term use.
Easy service and simple maintenance: the side panels can be removed to create access for service.
| INNOVA® M3 SPECIFICATIONS | ||
| Dimensions: | free standing unit W/D/H | 800 x 680 x 880 mm |
| Under counter unit W/D/H | 800 x 680 x 850 mm | |
| wash chamber W/D/H | 540 x 510 x 535 mm | |
| volume | 147 L | |
| Material: | Outer casing and wash chamber completely in stainless steel 304 | |
| Weight: | approx. 150 kg | |
| El. Connections: | 3 N/AC 400 V, 50 Hz,20 A and 60 Hz on request | |
| Connections: | Cold water | 3/4” 2 5 bar |
| Warm water | 3/4” 2 5 bar | |
| DI water | 3/4” 2 5 bar | |
| Waste water | 1 1/2” | |
| Drain water hose | 3/4” | |
| Wash power: | fresh water system pump capacity. 290 l/min, tank heating 7 kW | |
| Drying: | high pressure turbine 150 m 3/h,heating 3,4 kW | |
| DI water boiler: | optional: volume 20 l,heating power 9 KW,incl. heat recovery | |
| Dosing: | standard 2 dosing systems (max. 4) with dosing supervision and dynamic dosing | |
| Microprocessor control: | microprocessor control,2 line clear text display and key pad, optional: touchscreen 5.7”, 21 standard programs, 4 freely programmable program places for thermal and chemothermal disinfection, RS232 and CAN interface for communication and documentation | |
